At present, the single jersey circular knitting machines on the market are generally designed with two upper needle paths and four lower needle paths. According to the different needle alignment methods, they can be divided into rib machines and cotton wool machines, as well as rib cotton wool exchange machines, which can knit various small patterns. Double knitted fabric. However, the phenomenon of needle leakage often occurs in daily use. The following large circular knitting machine manufacturers will explain the relevant reasons for you:

1.The position of the yarn feeder is incorrect
The existence of such problems is relatively common, and it is also very convenient to solve. It only needs to adjust the position of the single jersey circular knitting machine.

2. The position of the brush is wrong
The position of the single jersey circular knitting machine may be incorrect or too high, so it is also necessary to check before processing, and adjust it once a problem is found.

3. The slider screw is loose
In the inspection of single jersey circular knitting machine, the existence of this problem may also be found, the loose screws need to be tightened, and the yarn feeder needs to be adjusted.

4. The length of single jersey circular knitting machine is inconsistent
Once such a situation occurs, it may also lead to missing needles during processing, so once found, the knitting needles need to be replaced in time.

5. Oil needle
During the weaving process of single jersey circular knitting machine, operation or mechanical problems lead to continuous or intermittent oily stripes on the fabric surface. The coloring effect of this stripe during dyeing is different from that of normal fabrics, and the finished fabrics appear coherent ( One stitch or several stitches of the fabric in the wale direction with oil traces and become straight stripes are called oil needles.

6. Pull frame
The tensioning frame is due to the poor passage of the pulling frame or the conveying wheel, which causes the tension of the pulling frame to be tight, forming a tight yarn-like horizontal pattern on the cloth surface;

7. Flying frame
The fly pull frame is due to the poor feeding of the pull frame, the needle hook is difficult to hook to the pull frame wire normally, the pull frame fails to be woven, the cloth surface is bubble-like, and the cloth bottom is shallow.

It is also play a very important role in our use of single jersey circular knitting machines or other related circular knitting machines if we can understanding the above reasons. If you encounter other problems in use, you can consult us at any time.